solid-phase sintering

The sintering production of with all calk to replace the limestone in Baogang Iron making plant was presented in this paper, in order to improve sintering compound raw material size compose, increase sintering Fe and reduce solid fuel consume.

本文介绍了包钢炼铁厂用生石灰全部代替石灰石的烧结工业试验，烧结采用全生石灰生产时，烧结混合料粒度组成改善，烧结矿品位有所提高，烧结固体燃耗有所降低。

The experiment results indicated that the complete perovskite structure is obtained when the sintering temperature is about 1200 ℃ of the PCZ ( 0.33) ceramic prepared by solid oxide.

实验发现，用固相法制备的PCZ（0.33）的陶瓷在1200℃左右烧结时可以得到的完全钙钛矿相。

The vertical bonding process by malting in the key process for manufacturing solid contacts. The contact of CuW was bonded with the tail of CrCu by malting in a vertical atmosphere-controllable sintering furnace.

自力型CuW/CrCu整体弧触头的立式熔接工艺是指在立式气氛可控烧结炉内对CuW触头部分与尾部CrCu熔结的过程，是制造整体触头的关键技术。

W-Cu and copper solid electrical contact materials, which were prepared by axial and radius direction pressing were fabricated by sintering-infiltration method.

针对轴向、径向两种压制方向成型的W Cu合金，采用烧结熔渗法制备W Cu/Cu整体电触头材料，测定结合面的抗拉强度及W Cu合金的电性能、显微组织和抗弯强度。

Alumina-based ceramic tribomaterials containing graphite or boron nitride as solid lubricant were synthesized via-press sintering process.

采用热压烧结工艺制备了氧化铝陶瓷为基体、添加固态润滑组元石墨或氮化硼的陶瓷基摩擦材料.